Mr Eade in SEDLESCOMBE
Consultant Chartered Engineer with extensive experience of electrical and control systems engineering, primarily relating to electrical installations and equipment • Certified Member of the Expert Witness Institute • CUBS Criminal Expert Witness Certificate holder • Published author on electrical safety of installations and equipment (by the IET) • BSI Standards Committee Chair or Member covering electrical installations and electrical safety, events and entertainment (including film and TV), electromagnetic compatibility (EMC) and audio • Experienced in civil and...
Mr Bell in SOLIHULL
Provision and Use of Work Equipment Regulations (PUWER) • CE marking • UKCA marking • Machinery Directive 2006/42/EC • Machinery design risk assessment EN ISO 12100 • Robot safety (EN 10218-1 and -2) • Functional safety (EN ISO 61508, EN ISO 62061, EN ISO 13849-1 & -2) • Automotive manufacturing safety • Safety of industrial trucks (AGVs/AMRs - EN 3691) • Machinery interlocks and lockout procedures (EN ISO 14119) • Prevention of unexpected start-up (EN ISO 14118)
Mr Maliakis in ESHER
1. Power plants (fossil fuelled, combined-cycled, solar, other RES). Expertise in power systems, protection, switchgear, transformers, generators, automation, communications 2. Data analytics - statistical analysis, based on statistical process control (SPC) and statistical quality control (SQC) 3. Maintenance activities, root cause analysis, root cause failure analysis 4. International arbitration in construction and energy disputes 5. (Re-) Insurance claims support 6. Loss adjusters support Mr Maliakis is based in Dubai but instructions are accepted worldwide.
Dr Peacocke in ROYAL HILLSBOROUGH
Expert on gasification and pyrolysis of biomass and wastes • Chemical engineering design of advanced thermal conversion systems from feed handling to products (heat, power) • Process engineering design of advanced thermal conversion systems • Due diligence of advanced thermal conversion systems • Techno-economic assessment of bio-energy systems • Practical experience in operation of thermal conversion systems • Process integration of thermal systems • Health and safety - ATEX II, DSEAR, HAZOP
Mr Marshall in NORTHWOOD
I have been a Chartered Mechanical, Electrical and Building Services Engineer for 40 years. I have a wide experience of mining, process industries, power generation, construction and mechanical and electrical engineering. I have been instructed on a broad range of matters, ranging from pressure vessels to electronic controls. Most engineers know how systems should work, and how to interpret standards. My speciality is in understanding, and explaining to laymen, why engineering systems do not work as expected, and in devising and implementing proportionate remedial measures. I have a good ...