Mr Pulford in ASHBY-DE-LA-ZOUCH
Mechanical engineering • Pressure vessels • Pressure systems • Safety of amusement rides • Safety of fairground rides • COMAH regulations • Gas explosions • Machinery guarding • Forensic engineering • Scaffolding • Construction • Chemical industry • Experienced in the assessment of requirement for, procurement, training, fitting, use, storage & maintenance of PPE & RPE
Mr Hoyle in ASHBY-DE-LA-ZOUCH
Detailed forensic investigation of accidents, incidents, materials and mechanical failure • Product liability/fitness for purpose • Application of health and safety legislation and associated standards • Hazard identification and assessment of risk • Incorporated Engineer with practical experience in the Lifting Equipment and Lifting Operations Regulations (LOLER) and Pressure Safety Systems Regulations (PSSR) inspection industries • Competent in lifting equipment, work equipment, Machinery Directive and general workplace risk from small business to large-scale in...
Eur Ing Lopez in LONDON
Rotating equipment • Packaged equipment • Machinery damage assessments • Mechanical and piping systems • MEP, oil, gas, power, petrochemical and energy transition • Pipelines • Wind turbine generators • Gearboxes • Pumps • Compressors • Diesel generators • Gas turbines • Air coolers • Heat exchangers • Heaters • HVAC • Pressure vessels • Valves • Lifting equipment • Asset integrity • LNG • LPG • Offshore • Cost estimates • Accident investigation •
Mr Mason in NEWCASTLE UPON TYNE
Accident investigation: agriculture; agricultural machinery and vehicles; construction sites; mechanical; factories; falls, trips and slips; footpaths, pavements, pedestrian; forklift trucks; HGVs; industry; ladders; leisure industry and sports; lifting equipment; lifting; machinery; manufacturing industry; occupational; plant engineering; play areas and playgrounds; scaffolding; warehousing industry; welding; woodworking industry Mechanical design • Mechanical appliances • Mechanical engineering, including project management • Offshore mechanical eng...
Mr Marshall in NORTHWOOD
I have been a Chartered Mechanical, Electrical and Building Services Engineer for 40 years. I have a wide experience of mining, process industries, power generation, construction and mechanical and electrical engineering. I have been instructed on a broad range of matters, ranging from pressure vessels to electronic controls. Most engineers know how systems should work, and how to interpret standards. My speciality is in understanding, and explaining to laymen, why engineering systems do not work as expected, and in devising and implementing proportionate remedial measures. I have a good ...
Mr Anderson in LEATHERHEAD
Principal Consultant of structural analysis for a major consultancy operating worldwide • Over nearly 30 years my particular fields of expertise are: • Stress analysis • Structural design, analysis, engineering & integrity • Finite element analysis • Fatigue • Fracture mechanics • Creep • Crack growth • Failure analysis • Dynamics • Vibration • Shock • Non-destructive testing • Design code assessments • Pipewhip • Missiles • Jet loadings • Blast • Safety cases • Risk
Mr Sproston in WIGSTON
Safety strategy and high-level policies • Hazard identification • Hazard assessment - qualitative and quantitative • ALARP • Safety integrity targeting • Safety integrity verification • Safety measure implementation, adequacy and assurance • Safety validation • Safety justification of complex equipment • Safety procedures/process development • Safety indicators/safety monitoring and reaction to events • Accident/incident investigation
Eur Ing Prof Cooper MBE in LONDON
Specialist areas of expertise: • Lifts • Escalators • Cable cars • Funiculars • Window cleaning apparatus • General lifting & handling plant • Rent reviews • Experienced in: • Personal injury & fatality investigations • Disputes over suitability & standards of workmanship • Professional negligence • Giving evidence in court Membership of professional bodies • Fellow of the Chartered Institute of Building Services Engineers (Past Chairman of Lift Committee)
Miss Bagnall in MARGAM
Metallurgical failure investigation • Failure analysis of polymer and composite materials • Expertise in a range of failure mechanisms, i.e. corrosion, mechanical failure, high temperature, structural failure, welding, coatings • Particular expertise in the thermal degradation of austenitic stainless steels and nickel-based alloys • Extensive experience in corrosion mechanisms for the power, petrochemical and oil and gas industries • Forensic engineering
Mr Lovis in SANDBACH
Consultant Forensic Engineer & expert witness undertaking the investigation of engineering incidents & personal injury accidents for commercial, legal & insurance clients • Provision of independent & impartial expert witness evidence • Mechanical, metallurgical & non-metallic materials (i.e. polymer, composite, rubber, glass & ceramic materials) based investigations • Forensic investigations both on-site & laboratory based • Component failure analysis, including expertise in fractography & electron microscopy (SEM) • Investigat...
Mr Hammersley in CHEADLE HULME
Consultant Forensic Mechanical & Materials Engineer & expert witness (practising since 1997, 18 years with Dr J H Burgoyne & Partners LLP (Burgoynes), 9 of which as a partner) • Forensic mechanical engineering-based investigations • Forensic metallurgical based investigations • Forensic polymer/non-metallic materials based investigations • Forensic component failure analysis, including expertise in fractography & electron microscopy • Forensic investigations into the cause of damage to equipment & machinery • Forensic ...
Mr Holland in GLASGOW
Vehicle, plant & machinery fires • Escape of water (water leak) investigation • Mechanical failure investigation • Personal injury • Road traffic collisions
Mr Oakley in BIRMINGHAM
Mechanical engineering • Mechanical failure • Product failure • Pneumatic engineering • Hydraulic engineering • Automotive engineering • Personal protective equipment • Classic vehicles • Accident investigation: agriculture; agricultural machinery and vehicles; construction sites; mechanical; factories; falls, trips and slips; footpaths, pavements, pedestrian; forklift trucks; HGVs; industry; ladders; leisure industry and sports; lifting equipment; lifting; machinery; manufacturing industry; occupational; plant engineering; play areas and playgro...
TCRI (Traffic Collision Reconstruction & Investigation Ltd) in WORCESTER
Road traffic accident prevention & reconstruction • Road traffic signals (traffic lights), timing analysis, operation • Cycling, road use • Mechanical accident investigation • Bicycles, motor vehicles, motorcycles & public service vehicles • Tachograph analysis • Motorcycle accident reconstruction • CCTV image analysis • Video image analysis, simulation & visualisation • Accident investigation of pedestrians • Road traffic investigation animation • Seat belt usage, failure & injury causation • Electronic da...
Dr Wright in LONDON
The forensic investigation of failed mechanical parts and machinery from general industrial/manufacturing, electrical power generation/transmission, petrochemical, automotive, water and construction industries • Collapse of cranes and large structures • Detailed experience of metal casting, reciprocating engines, gas turbines and other rotating machinery • Investigation of escapes of water/oil in domestic and commercial environments • Investigation of fractured glazing
Mr Polak in LIVERPOOL
Mechanical engineering machinery & components • Engines, transmissions, turbines, compressors, pumps • Gears, chains, bearings, brakes, clutches, couplings • Lubrication methods & systems • Friction & wear • Industries: rail, automotive, power, process, food, manufacturing, alternative energy (wind), marine, aviation, mining, oil & gas, chemical Additional e-mail:
[email protected]
Dr Doherty in LIVERPOOL
Nick is a Chartered Engineer and has been a mechanical engineer at Brookes Bell since 2005. He obtained MEng in Mechanical Engineering with Energy Studies from The University of Strathclyde in 1999. He obtained PhD in fluid mechanics research in 2005. His principal role at Brookes Bell is Computational Fluid Dynamics (CFD) analysis for various hydrodynamic and aerodynamic projects and fire simulations. He has advised clients as an independent expert on a number of legal cases and given evidence in arbitration in the UK, Europe and the United States....
Dr Renondeau in WARRINGTON
Tribology (dry and lubricated) and associated testing • Lubricants technology • Lubricant assessment - knowledge of a range of lubricants, their use, formulation and application • Failure analysis - materials aspects of the failure of equipment, root cause failure investigation and mitigation • Mechanical testing • Metrology