Accident investigation: • Industry & industrial premises • Construction & building • Docks • Agriculture • Transport & road traffic; highway • Offices & shops • Hospitals & nursing homes • Education • Sport & leisure • Domestic • Mechanical engineering: • Machinery defects & disputes • Cranes & lifting equipment • Papermaking machinery • Boiler plant & steam ancillaries • Mechanical handling equipment, including fork-lifts • Consumer product defects • Safety design • Machine tools • Manufacturing engineering & processes • Hydraulic engineering • Pneumatic...

Accident investigation • Permit to work & isolation • Machinery safety & guarding • Work at height & falling objects • Workplace transport • Confined space entry • Construction Design Management Regulations (CDM) • Safety management systems • Culture & behavioural safety • Experienced in the assessment of requirement for, procurement, training, fitting, use, storage & maintenance of PPE & RPE

Expertise: • Safety • Accident investigation • Health & Safety at Work Act & Regulations • Personal injury • Fires • Explosions • Risk assessment • Safety management • Occupational accidents • Product safety • Dangerous goods • Falls • Mechanical or structural failure • Machinery Sectors: • Industrial • Construction • Mechanical • Electrical • Manufacturing • Factories • Oil • Gas • Offshore • Chemicals • Pipelines • Railways • Public transport • Ports & docks • Food • Retail • Leisure

Mr Mamoon Alyah is a Chartered Electrical Engineer with 36 years of experience. Over the years, Mr Alyah has been instructed as an expert by clients in the USA, UK, Europe, Middle East and Australia. He prepared expert reports and provided expert advice in matters involving electrical power such as turbines (gas, steam and hydro), solar (PV and CSP), wind, transformers, switchgear, cables and others. Mr Alyah has given evidence in courtrooms and arbitration proceedings in numerous jurisdictions around the...

Escapes of water, oil and gas • Mechanical engineering • Building fires • Explosions • Vehicle, plant and machinery fires • White goods appliance fires • Composites • Glass and ceramics • Plastics and polymers • Manual handling

I accept instructions from defendants and claimants via solicitors on most health and safety topics. I have particular experience in health and safety legislation, fatal accident investigation, manufacturing, construction, banking, education, healthcare, charity, retail and pharmaceuticals. My skills include: risk assessment, training, work at height, fall prevention, safe systems of work, safety documentation and policies, fire safety and protection, COSHH, manual handling and work equipment.

Inspection of all types of motor vehicles for litigation purposes • Motorcycles, motor cars, sport, classics, electric vehicles, LGV, motor homes, caravans, PSV, HGV, horseboxes & trailers • Petrol & diesel engine component failure diagnosis, automatic gearboxes, manual gearboxes • Motor vehicle theft • Fire-damaged vehicles • Corrosion & paintwork faults • Repossession inspections • Unroadworthy vehicles • Lectures on automotive engineering • SJE • Legal aid work undertaken • Assistance at trial • Founder Member of the Society...

Consultant Forensic Engineer & expert witness undertaking the investigation of engineering incidents & personal injury accidents for commercial, legal & insurance clients • Provision of independent & impartial expert witness evidence • Mechanical, metallurgical & non-metallic materials (i.e. polymer, composite, rubber, glass & ceramic materials) based investigations • Forensic investigations both on-site & laboratory based • Component failure analysis, including expertise in fractography & electron microscopy (SEM) •...

After training as a marine engineer, I pursued a career in heat and mass transfer until establishing my own consulting firm. I was first retained by the Department of Energy, then by the DTI Design Advisory Service and the Production Engineering Research Association. I have since undertaken 46 plant design and build projects alongside 53 process consultancies, and completed 17 expert witness instructions. My CEng registration was predicated by the design and engineering of major projects for Alcan Aluminium,...

Technical: • Petroleum products, including treatment design & development • Energy conservation & management • Environment • Oil & gas processing • Pipelines • Metal cutting • Metal forming • Mineral oil extraction • Gas supply & control • Pharmaceutical products • Process plant • Pressure vessels • Food & drink processing machinery • Chemical industry machinery • Welding • Functional: • Consultancy services • Process engineering & contracting • Quality control • Assurance & inspection ISO 9001/2 • Project management • Purchasing & procurement • Contracting •...

Mechanical engineering • Asset management • Pressure vessels • Pressure systems • Lifting equipment and lifting operations • Safety of amusement rides • Safety of fairground rides • Machinery guarding • Movable bridges • Steel industry • Water pumping stations • Bulk handling equipment • Marine engineering • Mechanical lifting equipment • Lock gates • Power hydraulics • Industrial engineering

Electrical engineering • CE & PUWER conformity • Project management • Control systems • Machinery safety • Functional safety • Electrical inspection & testing • Electrical fire • Product recall • Insurance claims • Electrical installation disputes • Cardiff University Bond Solon Expert Witness Certificate

Rotating equipment • Packaged equipment • Machinery damage assessments • Mechanical and piping systems • MEP, oil, gas, power, petrochemical and energy transition • Pipelines • Wind turbine generators • Gearboxes • Pumps • Compressors • Diesel generators • Gas turbines • Air coolers • Heat exchangers • Heaters • HVAC • Pressure vessels • Valves • Lifting equipment • Asset integrity • LNG • LPG • Offshore • Cost estimates • Accident investigation • Root cause analysis • Contract management • Tendering • Procurement

Personal injury & fatal accidents, including: • Falling, tripping & slipping accidents • Workplace hazards • Machinery hazards • Manual handling, lifting & repetitive strain injury • Industry hazards • Cranes, lifts & forklift truck accidents • Domestic hazards • Commercial premises hazards & accidents • Sports & leisure accidents & hazards • Fairground & playground accidents • Musculoskeletal injury & diseases • Industrial products, including: • Defective equipment • Equipment failures • Product liability disputes • Product defects & injuries •...

Metallurgical failure investigation • Failure analysis of polymer and composite materials • Expertise in a range of failure mechanisms, i.e. corrosion, mechanical failure, high temperature, structural failure, welding, coatings • Particular expertise in the thermal degradation of austenitic stainless steels and nickel-based alloys • Extensive experience in corrosion mechanisms for the power, petrochemical and oil and gas industries • Forensic engineering

Tribology (dry and lubricated) and associated testing • Lubricants technology • Lubricant assessment - knowledge of a range of lubricants, their use, formulation and application • Failure analysis - materials aspects of the failure of equipment, root cause failure investigation and mitigation • Mechanical testing • Metrology

Mechanical engineering • Electrical engineering • Agricultural engineering • Electromechanical engineering • Process and machinery • Electrical fires • Plumbing • Electrical systems

Accident damage to motor vehicles • Mechanical failure in vehicles & plant • Inspections of mechanical plant • Valuations of vehicles • Valuations of mechanical plant • Inspection of damage to agricultural vehicles & machinery • Valuation of agricultural vehicles & machinery

Consultant Forensic Mechanical & Materials Engineer & expert witness (practising since 1997, 18 years with Dr J H Burgoyne & Partners LLP (Burgoynes), 9 of which as a partner) • Forensic mechanical engineering-based investigations • Forensic metallurgical based investigations • Forensic polymer/non-metallic materials based investigations • Forensic component failure analysis, including expertise in fractography & electron microscopy • Forensic investigations into the cause of damage to equipment & machinery • Forensic...

Vehicle, plant & machinery fires • Escape of water (water leak) investigation • Mechanical failure investigation • Personal injury • Road traffic collisions

I was a forensic vehicle examiner employed by Thames Valley and Hampshire Police. I have examined a large number of vehicles over a 20 year period. These would include cars, HGV, PSV, motorcycles and plant equipment. I have identified many stolen vehicles over the same period. I have compiled witness statements for the CPS, and presented expert evidence in Crown, Magistrates', Civil and Coroner's Courts. Since retiring in 2021, I am now an independent forensic vehicle examiner undertaking expert work.

Investigation of industrial & leisure accidents of almost every kind • Preparation of detailed court reports supported by photographs & plans • Manufacturing plant & machinery • Sports, play & leisure • Slips, trips & falls • Manual handling • Woodworking machinery • Work-related upper limb disorders • Consumer product defects • Noise & deafness • Construction work • Fork-lift trucks • Agricultural machinery • Road traffic accidents • Ladders & scaffolding • Fires & explosions • Welding • Hand-arm vibration syndrome

Health & safety management systems • Organisational culture • Training & education • Incident investigation • Workplace traffic management • Machinery safety & guarding • Manual handling • Noise • Thermal comfort & stress • Confined space entry • COSHH assessments • Airborne contaminant control • Experienced in the assessment of requirement for, procurement, training, fitting, use, storage & maintenance of PPE & RPE • Exposure to hazardous substances • Asbestos exposure • Occupational hygiene

Investigating the causes of fires, explosions, electric shocks, personal injuries, vehicle fires, engineering failures & matters of contractual dispute • Assisting with litigation processes & appearing as expert witness • Training & lecturing in above matters can be provided, especially for continuing professional development

Occupational safety & health representation • Accident/incident investigation • Risk assessment & analysis • Management systems • Safe work systems • Human factors • Engineering failures • Compliance • Due diligence • Expert witness • COVID 19 risk assessment, audit & compliance checking • Review of systematic failures and consequences investigation.

Health & safety • Mechanical engineering design • Investigation of industrial accidents, personal injuries & fatalities • Occupational diseases (asbestos, noise, hand-arm vibration) • Investigations of fire & explosions • Investigation of defective engineering design & plant mal-performance • Risk assessments • PPE • Safe systems of work • Legionnaires disease

Personal injury • Product liability • Professional negligence claims • Environmental health • Consumer protection • Building & construction problems & safety • Playground accidents • Ladder accidents • Structures & structural engineering • Road traffic accident investigation & reconstruction • Agricultural & horticultural • Manufacturing industries • Electrical safety • Chemical safety • Industrial diseases • Musculoskeletal disorders & RSI • Slips, trips & falls • Fork-lift trucks • Guards & guarding systems • Factory accidents Experts in the...

General safety & electrical engineering issues • Equipment used in potentially explosive atmospheres • Application of health & safety legislation & assessment of risk • Suitability of equipment & design specification • Track-mounted cableway installations • Provision & Use of Work Equipment Regulations (PUWER) • Dangerous Substances & Explosive Atmospheres Regulations (DSEAR) • CE Machinery Directive Additional office at: • 188 Burton Road, Ashby de la Zouch , Leicestershire, LE65 2TF.

Metallurgy • Welding fabrication • Corrosion • Materials selection • Mechanical testing of materials • Identification of material damage mechanisms

Mechanical and electrical engineering systems (M & E) • LOLER Thorough Examinations • PSSR Thorough Examinations and written schemes • PUWER inspection • COSHH Thorough Examination and test • Agricultural equipment, including telescopic handlers and front loaders • Mobile elevating work platforms • Pressure systems, including major, intermediate and minor • Regulatory compliance engineering • Loss control engineering • Accident investigation • Equipment failure investigations • Material failure • Technical due diligence • Health and safety...

Investigation of industrial accidents • Preparation of detailed court reports supported by photographs & plans • Manual handling • Upper limb disorders • Falls & falling objects • Slipping & tripping • Machinery • Noise & deafness • Component failures

Metallurgist, materials scientist, inspection and failure expert • 40 years+ experience • Experienced expert witness • Non-destructive testing and evaluation (NDT, NDE) • Failure analysis • Metallurgical analysis • Fracture mechanisms • Inspection performance & reliability • Probability of detection (POD) • Human reliability • Digitalisation • Corrosion • Cracking • Hydrogen embrittlement (HIC) • Welding defects • Steam turbine failures • Hospital pipework • Storage tanks & facilities • Pipelines • Composite materials (GRP, CFRP) • Offshore • Oil...

I have a wide experience in mining, process industries, power generation, construction and mechanical and electrical engineering. I have been instructed on a broad range of matters, ranging from pressure vessels to electronic controls. Most engineers know how systems should work, and how to interpret standards. My speciality is in understanding, and explaining to laymen, why engineering systems do not work as expected, and in devising and implementing proportionate remedial measures. I have a good track record...

Building services engineering, mechanical & electrical • Commercial vehicles • Mechanical components & machinery failure investigations • Engineering design

Valuation of plant & machinery for: • Insurance purposes • Open market values • Experience in: • Machine tools • Contractors plant • Brewery industry • Printing • Textiles • Motor vehicles

Experience covers failure investigations on: • Metals: ferrous & non-ferrous • Non-metals: plastics & glass • Welding & fabrication • Lifting equipment, cranes, hoists, chains, nylon slings & hooks • Fire damage • Plant & machinery component failures • Construction materials & components: bolts, rebar, glazing units, etc. • Surface coatings: metallic, organic or thermally sprayed • Non-destructive testing • Historic structures & materials: bronze, cast iron & wrought iron • Corrosion problems: inland & marine • Marine failures:...

The forensic investigation of failed mechanical parts and machinery from general industrial/manufacturing, electrical power generation/transmission, petrochemical, automotive, water and construction industries • Collapse of cranes and large structures • Detailed experience of metal casting, reciprocating engines, gas turbines and other rotating machinery • Investigation of escapes of water/oil in domestic and commercial environments • Investigation of fractured glazing

Accident investigation: agriculture; agricultural machinery and vehicles; construction sites; mechanical; factories; falls, trips and slips; footpaths, pavements, pedestrian; forklift trucks; HGVs; industry; ladders; leisure industry and sports; lifting equipment; lifting; machinery; manufacturing industry; occupational; plant engineering; play areas and playgrounds; scaffolding; warehousing industry; welding; woodworking industry Mechanical design • Mechanical appliances • Mechanical engineering, including project...

Principal Consultant of structural analysis for a major consultancy operating worldwide • Over nearly 30 years my particular fields of expertise are: • Stress analysis • Structural design, analysis, engineering & integrity • Finite element analysis • Fatigue • Fracture mechanics • Creep • Crack growth • Failure analysis • Dynamics • Vibration • Shock • Non-destructive testing • Design code assessments • Pipewhip • Missiles • Jet loadings • Blast • Safety cases • Risk management • Probabilistic analysis • Peer review

Mechanical engineering • Mechanical failure • Product failure • Pneumatic engineering • Hydraulic engineering • Automotive engineering • Personal protective equipment • Classic vehicles • Accident investigation: agriculture; agricultural machinery and vehicles; construction sites; mechanical; factories; falls, trips and slips; footpaths, pavements, pedestrian; forklift trucks; HGVs; industry; ladders; leisure industry and sports; lifting equipment; lifting; machinery; manufacturing industry; occupational; plant engineering;...

Compliance of machinery to legal requirements (e.g. Supply of Machinery (Safety) Regulations) and associated designated standards and the Machinery Directive (EU) • Functional safety of machinery • Provision and Use of Work Equipment Regulations (PUWER), e.g. guarding of machinery • Safety of electrical and control systems for machinery

Nick Hepher is a highly experienced cement process engineer, with specialist knowledge for milling, pyro-processes, particle and separation technologies. With over 40 years' experience on the 'front line', Nick's 'hands on' approach has involved him in all aspects of the business, including process design, sales, contract execution, spares and services. He has been responsible for the engineering aspects of projects, both 'turn-key' and 'supply-only', and involved in sales and project management for both...